阶梯式生态护坡模具在使用的时候需要我们注意的问题非常的多，只要严谨的进行制作，我们才能保证阶梯式生态护坡钢模具产品质量的合格，在制作的时候，尤其需要我们注意的一步就是灌浆，在灌浆的时候我们都知道是将混凝土倒入在模具的内腔中，但是很多人并不了解这其中的操作手法，操作手法是非常重要的，我们在建设生产的时候，要缓慢的将混凝土倒入阶梯式生态护坡模具之内，因为速度过快会影响到模具，因为速度过快产生的压力会更大，对模具的造成的压力会大大增加，而且在进行灌浆的时候，我们还要进行震动，震动的时候可以使用震动棒，让振动棒放在混凝土的底部，然后进行同一方向的搅拌，这样才能保证震动的充分，一般在搅拌的时候是按照区域进行划分的，一个区域差不多应该震动在一分钟左右，内部的气泡就可以震动出来了，气泡震动出来之后，阶梯式生态护坡模具产品干燥之后内部结构就会非常的紧密。
There are many problems that we need to pay attention to when using the stepped ecological slope protection mold. As long as we make it strictly, we can ensure the qualified product quality of the stepped ecological slope protection steel mold. When making it, we especially need to pay attention to grouting. When grouting, we all know that it is pouring concrete into the inner cavity of the mold, but many people do not understand the operation method, The operation method is very important. During construction and production, we should slowly pour the concrete into the stepped ecological slope protection mold, because too fast will affect the mold, because the pressure generated by too fast will be greater, and the pressure on the mold will be greatly increased. In addition, during grouting, we also need to vibrate. When vibrating, we can use the vibrating rod and put the vibrating rod at the bottom of the concrete, Then stir in the same direction to ensure sufficient vibration. Generally, when stirring, it is divided according to the area. An area should vibrate for about one minute, and the internal bubbles can vibrate out. After the bubbles vibrate out, the internal structure of the step ecological slope protection mold will be very close after the product is dried.